Certified quality management system
Measurement Technology
Measurement engineering is a major division of Sourcetronic. Your measurement engineering specialist, specialized on highly diverse measurements, such as resistor measurements, LCR, high voltage, isolation resistors, security tests but as well multimeters, oscilloscopes and software.
- Warning light incl. installation of the interface on the high-voltage tester
- Devices: ST9200 series, ST9300 series
- Cable length: 1.5m
- Standard: EN 50191
- Light: Red/green
- Function: rd HV ON/gr HV OFF
- Test current: 1 A - 45 A
- Output voltage: 8 V max
- Grounding resistance range: 0-600 mΩ
- Four-terminal test mode to ensure test accuracy
- The internal power amplifier circuit drives the current output, which is not affected by the power supply and load
- The output holes on the front and rear panels are designed to facilitate the integration of standard chassis
- 480 x 272 dots, TFT-LCD display
- 999.9 seconds test time
- Keyboard lock function to prevent misoperation
- Safety lock function to prevent the instrument from accidentally opening the test state
- Store 20 test files, each with 20 test steps
- 1.000 V Megohmmeter
- Insulation test 10 kΩ to 1 TΩ
- Digital & bar-graph reading
- Automatic measurement:
Dielectric Absorption Index (DAI),
Polarization Index (PI) - Chronometer up to 90 minutes
- Step voltage test
- Built-in printer (option)
- 4000 readings memory
- Isolated USB data port
- Software for data management
- Rechargeable battery
- Accuracy: 0.05%
- Frequency range: 20 Hz - 2 MHz
- Measurement speed: < 1ms
- DCR: 0.00001 Ω ~ 99.9999 MΩ
- Resolution: 6 digits
- Display: Touch colour TFT 10.1"
- DC bias: ±40 V
- Interfaces: USB, LAN, RS232C, Handler
- Extra: ST®Meter 4.0 software, signal level 20 Vrms; Linux-based system, incl. accessories
- Earth resistance measurement up to 20kΩ
- Built-in voltmeter
- High accuracy and resolution
- Immunity to spurious voltage interference
- USB Data output
- Accuracy: 0.05%
- Frequency range: 20 Hz - 500 kHz
- Measurement speed: < 1ms
- DCR: 0.00001 Ω ~ 99.9999 MΩ
- Resolution: 6 digits
- Display: Touch colour TFT 10.1"
- Interfaces: USB, LAN, RS232C, Handler
- DC bias: ±40 V
- Extra: ST®Meter 4.0 software, signal level 20 Vrms; Linux-based system, incl. accessories
- Devices: hipot testers 36 series
- Signal lamp: red / green
- Conforming to all standards: VDE0104, EN50191
- Status:
- READY FOR OPERATION
- READY TO SWITCH ON
- IN OPERATION
- Voltage: 230V
- Cable length: 2m
previously £2,151.36*
- 10KV Megohmmeter
- Insulation resistance up to 2TΩ
- Test voltages: 5kV - 10kV
- Guard terminal
- Rechargeable power-battery
- Multiple scales for precision improvement
- Charger 110 and 230 V
- Accurate & rugged Heavy-Duty-Equipment
- IP-54 protection
- CE mark
- Robust 19" mounting frame
- Metal powder coated
- Device mounting front side
- Devices: ST2827
- Color: RAL7035 light gray
- Height: 3 HE
- 100 A Low-Resistance-Meter
- Direct reading 4 ½ digits
- Resolution: 0.1 µOhm
- Resistance reading up to 300 mOhm
- 100 A test current
- Powered by internal battery or main
- Overheating protection
- Bluetooth for configuration and control
- USB Port
- Protection IP54
- Frequency: 20Hz - 2MHz
- Accuracy: 0.01%
- Display:
- 10.1" Capacitive Touch Screen
- Resolution: 1280×RGB×800
- The bias voltage is built-in ±40V/±100mA/2A
- Interfaces: LAN, USB, RS232C, RS485, Handler, External DC BIAS Control
- Optional LCR Function
- Comfortable foot switch for Transformer Tester ST2840 Series
- For safety in the workplace
