Certified quality management system
Measurement Technology
Measurement engineering is a major division of Sourcetronic. Your measurement engineering specialist, specialized on highly diverse measurements, such as resistor measurements, LCR, high voltage, isolation resistors, security tests but as well multimeters, oscilloscopes and software.
- For Testing Devices and Cables
- For 1 and 3 phase extension line
- Combination with DIN VDE 0701-0702 Test Instruments
- Electrical devices and extension cables with CEE plug connectors
- Protection: IP40
- 5000 VAC high voltage test
- 1000 VDC insulation test
- 5.7" TFT-Industrial-Touch-Screen
- Large variety of interfaces
- DataView software
- HV Test: 10kV AC / 14kV DC
- Short circuit current: 100mA
- 1k VA power / potential free
- Burning function and ramp
- Digital voltage control
- RS232, digital I/O (SPS), CAN
- Software, DLL, LabView, Active-X (option)
- Work place according to EN 50191
- HV Test: 50kV AC
- Test current: 0.5mA - 100mA
- 5k VA power / potential free
- With oil transformator
- Burning function and ramp
- Digital voltage control
- RS232, digital I/O (SPS), CAN
- Software, DLL, LabView, Active-X (option)
- Work place according to EN 50191
- Measurement display range: 0.1μΩ -110MΩ
- Max. Accuracy: 0.01%
- 4.3" colour-touch-screen
- Resolution: 0.1µΩ (resistance)
- Interface: LAN-LXI, RS232, USB HOST, USB Device, GPIB (option)
- Temperature accuracy: 0.1°
- Conforming to all standards
- Emergency stop for tester
- Load: 16 A
- Cable length: 5 m
- HV Tester: UB28C
- With foot protection cover
- Start via control-IO
- With plug: SUB-D 9-pole
- Access to control interface
- Cable length: 2m
- Devices: 400 series
- Mounted on tube extension
- Total hight of lamps 1170mm
- Standard: EN 50191, VDE0104
- Lights: Red/Green
- Function: operation, switch on, ready
- Cable length: 3m
- Reliable High Voltage Relay
- 1 change-over contact
- 5000 VA
- Current 30 A
- Monostable DC HV relay
- Special-High-Insulated plastic body
- LED display with activated coil
- Extinguishing diode for exciting coil
- Coils/operating-connections interchanging-safe
- Text and screen displayed steps
- Single step-mode
- Large PASS-FAIL display
- Network integration
- Data-format: xml / Access / SQL
- Statistic-functions
- Barcorde function
- Devices: High Voltage Tester 36-Series
- Remote control via:Ethernet / USB / RS232
- Integration label-printer
- Including cable set for hipot tester 36 series
- Dimension (W/H/D):
Outside: 450 / 515 / 495 mm
Inside: 360 / 350 / 450 mm - Completely mounted and wired for plug&play
- PVC design-housing
- Viewable transparent swinging hood
- Damping gas spring
- Safety limit switch
- CE conform with EN 50191
- Devices: Hipot Tester ST9201, ST9201B/BX, ST9201C/CX, ST9201S/SX
- Robust transport "trolley"
- Aluminium frame lid can be opened
- Equipment compartment with punctual foam lining
- Clearly arranged accessory compartments
- Highest transport safety
- 2 middle butterfly locks at the front
- 2 locking hinges at the rear
- 2 centre folding handles