Gecertificeerd kwaliteitsmanagementsysteem
Accessoires frequentieregelaars - Software en hardware
Frequentieregelaars worden in veel toepassingsgebieden gebruikt. De frequentieregelaars moet altijd volledig functioneel en betrouwbaar zijn. In de praktijk zijn er een aantal effecten, zoals storende straling, spanningspieken, remwerking van motoren met grote belastingen en storende effecten in de toevoerleiding van de motor. Om ondanks deze interferentie-effecten altijd betrouwbaar te kunnen werken, kan het in sommige situaties nodig zijn om deze effecten tegen te gaan. Sourcetronic biedt daarom hoogwaardige accessoires voor frequentieregelaars.
Deze omvatten EMC ingangs- en uitgangsfilters, externe remunits en remweerstanden. EMC-filter is verkrijgbaar als een zogenaamd netfilter en motorfilter. Netfilters onderdrukken interferentie in de voedingslijn naar frequentieregelaars, terwijl motorfilters interferentie in de voedingslijn naar de motor onderdrukken. Externe remeenheden worden voornamelijk gebruikt in toepassingen met zware belastingen en snelle belastingswisselingen op de motor. De remeenheid beschermt de frequentieregelaars tegen overtollige energie in het tussencircuit dat door de motor wordt teruggevoerd. Deze overtollige energie wordt vervolgens door de remweerstanden die op de remeenheid is aangesloten, omgezet in thermische energie en afgegeven aan de omgeving. De meeste accessoires kunnen universeel gebruikt worden en niet alleen voor Sourcetronic frequentieregelaars.
- Compatible with frequency inverters of the ST600 series
- Compatible with PLC Siemens S7-1200 or S7-1500 with TIA Portal V15
- The Profinet card is connected via two RJ45 sockets
- Compatible with ST600 frequency inverter series
- PROFIBUS standard: DP
- Connection via Sub-D-9 socket
- Transmission rate: 9.6kbit/s to 12Mbit/s
- Up to 32 nodes (without repeater) and 127 nodes (with repeater) in one segment of the network
- 24V power supply card SPS501-24 recommended as a supplement
- Compatible with ST600 series frequency inverters
- For ABZ incremental encoders with differential, push/pull or OC output
- Voltage: 5/12VDC switchable via SW1
- 5V differential frequency divider output, configurable from 1:1-2255
- Intuitive installation thanks to plug and play: just plug in and go
- Compatible with ST600 series frequency inverters
- For ABZ incremental encoders with differential, push/pull or OC output
- Voltage: 24V
- 5V differential frequency divider output, configurable from 1:1-2255
- Intuitive installation thanks to plug and play: just plug in and go
- Compatible with ST600 series frequency inverters
- PG card for brushless resolver
- Excitation voltage 7 VRMS, frequency 10kHz
- Recommended transfer ratio: 0.5
- Resolver output voltage 1±0.2Vpp
- 5V differential frequency divider output ABZ, configurable from 1:1-2255
- Intuitive installation thanks to plug and play: just plug in and go
- Compatible with ST600 series frequency inverters
- Sinusoidal encoder with/without C/D signals
- Voltage: 5VDC
- Easy installation thanks to plug and play
- Telefonische Beratung
- Auslegung und Inbetriebnahme
- Individuelle Parametrierung
- Programmbetrieb
- Parameterliste
- Compatible with ST600
- 4 digital inputs
- 1 digital output
- 1 analog input
- 1 analog output
- 1 relay with changeover contact
- 1 relay with one normally open
- Compatible with ST600 series of frequency converters
- High resolution graphical LCD control panel
- Connection via RJ45
- Compatible with ST600 frequency inverter series
- Recommended when using communication cards
- Enables communication with the inverter even when power supply is interrupted
- Compatible with ST600
- 4 digital inputs
- 1 digital output
- 2 relays with one normally open contact each.
- 1 connection for a PT100 temperature sensor
- 1 connection for a PT1000 temperature sensor
- Large shield mounting for motor cables
- Simple and efficient shielding connection
- Suitable for ST300 frequency inverters up to 4 kW
- Large shield mounting for motor cables
- Simple and efficient shielding connection
- Suitable for ST300 frequency inverters from 5.5 kW - 7.5 kW
