• Anmelden

ST130 Error codes

  1. ST130 | Error E.oL2 – What does it mean and what can be done?

    If the error message E.oL2 appears on the ST130 inverter display, it indicates an overload fault of the inverter itself. Possible cause […]
  2. ST130 | Error E.oL1 – What does it mean and what can be done?

    If the error message E.oL1 appears on the ST130 inverter display, it indicates a motor overload fault. Possible cause Possible solution Motor […]
  3. ST130 | Error E.LU – What does it mean and what can be done?

    If the error message E.LU appears on the ST130 inverter display, it indicates an undervoltage fault. Possible cause Possible solution Temporary loss […]
  4. ST130 | Error E.oU3 – What does it mean and what can be done?

    If the error message E.oU3 appears on the ST130 inverter display, it indicates an overvoltage fault during constant speed operation of the […]
  5. ST130 | Error E.oU2 – What does it mean and what can be done?

    If the error message E.oU2 appears on the ST130 inverter display, it indicates an overvoltage fault during braking of the connected motor. […]
  6. ST130 | Error E.oU1 – What does it mean and what can be done?

    If the error message E.oU1 appears on the ST130 inverter display, it indicates an overvoltage fault during motor acceleration. Possible cause Possible […]
  7. ST130 | Error E.oC3 – What does it mean and what can be done?

    If the error message E.oC3 appears on the ST130 inverter display, it indicates an overcurrent fault during constant speed operation of the […]
  8. ST130 | Error E.oC2 – What does it mean and what can be done?

    If the error message E.oC2 appears on the ST130 inverter display, it indicates an overcurrent fault during the braking phase of the […]
  9. ST130 | Error E.oC1 – What does it mean and what can be done?

    If the error message E.oC1 appears on the ST130 inverter display, it indicates an overcurrent fault during acceleration of the connected motor. […]
  10. ST130 | Error E.oUP – What does it mean and what can be done?

    If the error message E.oUP appears on the ST130 drive’s display, it indicates a phase error in the inverter. Possible cause Possible […]