ST600s | Err.64, what does this message mean, what can be done?
If the error message Err.64 appears on the display of the frequency inverter, it is a timeout at the expansion card in card slot 2.
Causes:
- There is no data transfer at the interfaces of card slot 2.
Solutions:
- Check if the inserted expansion card can be supported.
- After switching off the expansion card, insert it again and check whether the error still occurs the next time it is switched on.
- Check if the drawer is damaged, if so, replace it after power off.
If none of these error sources apply, please contact technical support.
Tags: