ST600s | Err.63, what does this message mean, what can be done?

If the error message Err.63 appears on the display of the frequency inverter, it is a timeout at the expansion card in card slot 1.

Causes:

  • There is no data transfer at the interfaces of card slot 1.

Solutions:

  • Check if the inserted expansion card can be supported.
  • After switching off the expansion card, insert it again and check whether the error still occurs the next time it is switched on.
  • Check if the drawer is damaged, if so, replace it after power off.

If none of these error sources apply, please contact technical support.

Tags: