ST600s | Err.61, what does this message mean, what can be done?

If the error message Err.61 appears on the display of the frequency inverter, it is an error in the identification of the expansion card in card slot 2.

Causes:

  • Data is transferred at the interfaces of card slot 2, but the card type cannot be read.

Solutions:

  • Check if the inserted expansion card can be supported.
  • After switching off the expansion card, insert it again and check whether the error still occurs the next time it is switched on.
  • Check if the drawer is damaged, if so, replace it after power off.

If none of these error sources apply, please contact technical support.

Tags: