ST600s | Err.41, what does this message mean, what can be done?

If the error message Err.41 appears on the display of the frequency inverter, it is a fault in the safe circuit of channel H1.

Causes:

  • STO is improperly wired.
  • Error occurred on the external switch of STO.
  • Hardware error occurred in the safety circuit of channel H1.
  • xxx

Solutions:

  • Check if the terminal wiring of STO is proper and tight enough.
  • Check if the external switch of STO is working properly.
  • Replace the control board.

If none of these error sources apply, please contact technical support.

Tags: