Miliohmetro ST2516

Destacados

• Rango de visualización de la medición: 1µΩ - 2MΩ
• Precisión básica: 0,05%
• Pantalla táctil en color de 4,3"
• Resolución: 10µΩ - 10Ω
• Interfaz: Manejador, RS2323C, USB
• Medición de la temperatura

Especificaciones

• Velocidad de medición: RÁPIDA 10ms / MED 25ms / LENTA1 (115ms) / LENTA2 (445ms)
• Modo de alcance: automático, manual
• Modo de disparo: Interno, Manual, Externo y BUS
• Interfaz del controlador, RS2323C, USB
• Función de memoria: 30 juegos
• Temperatura y humedad de funcionamiento: 0°C - 40°C, ≤90%RH
• Requisitos de potencia: Tensión: 190V - 250V / Frecuencia 50Hz - 60Hz
• Consumo de energía: 30VA
• Dimensiones (A/H/D): 215/89/360 mm
• Peso: 3,3 kg

Rangos de visualización de medidas

Qué hay en la caja

• ST26050 Pinzas de prueba Kelvin de 4 terminales
• Manual de funcionamiento
• Certificado de calibración de fábrica
• Sensor de temperatura
Cerrar menú
Downloads
• ST2516 Datenblatt (533.85 KB)
• ST2516 Datasheet (532.3 KB)
• ST2516 User Manual (1.89 MB)
Cerrar menú
Software
ST®Meter 3.0 Plus
Cerrar menú
Datos técnicos

Gamas	Resolución	Actualidad	ST2516B	ST2516A	ST2516
20mOhm	1µOhm	1A	x		x
200mOhm	10µOhm	100mA	x	x	x
2Ohmios	100µOhm	100mA	x	x	x
20Ohmios	1mOhm	10mA	x	x	x
200Ohm	10mOhm	1mA	x	x	x
2KOhm	100mOhm	100µA	x	x	x
20KOhm	1Ohm	10µA	x	x	x
200KOhm	10Ohm	10µA		x	x
2MOhm	100Ohmios	1µA			x

Technical specification
Model		ST 2516				ST 2516A				ST 2516B
Display
Display		24-bit, 400 X 272 and touch TFT LCD screen
Reading digits		4 ½ digits
Resistance measurement
Measurement range		0.1µΩ - 2MΩ				10µΩ - 200kΩ				1µΩ - 20kΩ
Resistance range		Current	Resolution			Current	Resolution			Current	Resolution
20mΩ		1A	1µΩ			--------				1A	1µΩ
200mΩ		100mA	10µΩ			100mA	10µΩ			100mA	10µΩ
2Ω			100µΩ				100µΩ				100µΩ
20Ω		10mA	1mΩ			10mA	1mΩ			10mA	1mΩ
200Ω		1mA	10mΩ			1mA	10mΩ			1mA	10mΩ
2kΩ		100µA	100mΩ			100µA	100mΩ			100µA	100mΩ
20kΩ			1Ω				1Ω				1Ω
200kΩ		10µA	10Ω			10µA	10Ω			--------
2MΩ		1µA	100Ω			--------				--------
Measurement function
Resistance measurement time		FAST:10ms; MED:25ms; SLOW1:115ms; SLOW2:455ms Above data is correct when DISPLAY is OFF; when DISPLAY is ON, 20ms should be added.
Temperature measurement time		100 ± 10ms				--------
Test terminal		4-terminal
Average setup		1-255
Zero clearing		√
Range switch		AUTO and Manual
Trigger mode		Internal, Manual, External, BUS
Power frequency selection		√ (avoid the interference of the power noise)
Setting data storage		30 groups
Low voltage measurement		Open voltage: ≤40mV Effective range: 2Ω, 20Ω, 200Ω, 2kΩ
Thermal electromotive force elimination		√								-----
Statistics function		AVG, MAX, MIN, OSD(Overall standard deviation), SSD(Sample standard deviation), Process capacity index (Cp, CpK)
Beep state		Comparator, Button
Key lock		√
Temperature measurement
Temperature measurement1		-10.0°C--99.9°C Sensor:PT500				-----				-----
Temperature measurement2		Analog input:0V--2V Display:-99.9°C -- 999.9°C				-----				-----
Temperature compensation		(Convert the resistance measurement value to that one measured under preset temperature)				-----				-----
Temperature switch		(Temperature rising is gained from resistance test values before and after warming)				-----				-----
Compare Judge
Comperator	Signal oudput	HI/IN/LO
	Beep	Beep mode:OFF,IN,HI/LO
	Limit setup mode	Absolute value high/low limit, Percentage high/low limit +nominal value
Sorting		3 bins, absolute value/ percentage
External trigger delay time		AUTO: dependent on range, low voltage mode ON/OFF, OVC (offset voltage compensation) ON/OFF MANUAL: 0.000--9.999s
External input trigger		Rising/Falling edge
Interface
Interface		USB DEVICE, USB HOST, RS232C, HANDLER
General specification
Temperature/Humidity		0 - 40°C, ≤90%RH
Temperature/Humidity for basic accuracy		23±5°C ≤80%RH
Power	Voltage	90 - 110V, 190 - 220V
	Frequency	50Hz/60Hz
Consumption		30 VA
Dimension		215mm×89mm×360mm(net size) 235mm×104mm×360mm(with foam sheath)
Weight		3.6kg