Certyfikowany system zarządzania jakością
Akcesoria przetwornica częstotliwości - Oprogramowanie i sprzęt
Przetwornica częstotliwości są wykorzystywane w wielu obszarach zastosowań. Strona przetwornica częstotliwości musi być zawsze w pełni funkcjonalna i niezawodna. W praktyce występuje wiele efektów, takich jak promieniowanie zakłócające, skoki napięcia, hamowanie silników z dużymi obciążeniami i efekty zakłócające w linii zasilania silnika. Aby zawsze działać niezawodnie pomimo tych zakłóceń, w niektórych sytuacjach może być konieczne przeciwdziałanie tym efektom. Sourcetronic oferuje wysokiej jakości akcesoria dla przetwornica częstotliwości.
Obejmują one filtry wejściowe i wyjściowe EMC, zewnętrzne jednostki hamujące i rezystory hamujące. filtry EMC jest dostępny jako tak zwany filtr sieciowy i filtr silnika. Filtry sieciowe tłumią zakłócenia w linii zasilającej do przetwornica częstotliwości, podczas gdy filtry silnikowe tłumią zakłócenia w linii zasilającej do silnika. Zewnętrzne jednostki hamujące są używane głównie w aplikacjach z dużymi obciążeniami i szybkimi zmianami obciążenia silnika. Jednostka hamująca chroni przetwornica częstotliwości przed nadmiarem energii w obwodzie pośrednim, która jest dostarczana z powrotem z silnika. Ten nadmiar energii jest następnie przekształcany w energię cieplną przez rezystory hamujące podłączony do jednostki hamującej i uwalniany do otoczenia. Większość akcesoriów może być używana uniwersalnie, a nie tylko dla Sourcetronic przetwornica częstotliwości.
- Compatible with frequency inverters of the ST600 series
- Compatible with PLC Siemens S7-1200 or S7-1500 with TIA Portal V15
- The Profinet card is connected via two RJ45 sockets
- Compatible with ST600 frequency inverter series
- PROFIBUS standard: DP
- Connection via Sub-D-9 socket
- Transmission rate: 9.6kbit/s to 12Mbit/s
- Up to 32 nodes (without repeater) and 127 nodes (with repeater) in one segment of the network
- 24V power supply card SPS501-24 recommended as a supplement
- Compatible with ST600 series frequency inverters
- For ABZ incremental encoders with differential, push/pull or OC output
- Voltage: 5/12VDC switchable via SW1
- 5V differential frequency divider output, configurable from 1:1-2255
- Intuitive installation thanks to plug and play: just plug in and go
- Compatible with ST600 series frequency inverters
- For ABZ incremental encoders with differential, push/pull or OC output
- Voltage: 24V
- 5V differential frequency divider output, configurable from 1:1-2255
- Intuitive installation thanks to plug and play: just plug in and go
- Compatible with ST600 series frequency inverters
- PG card for brushless resolver
- Excitation voltage 7 VRMS, frequency 10kHz
- Recommended transfer ratio: 0.5
- Resolver output voltage 1±0.2Vpp
- 5V differential frequency divider output ABZ, configurable from 1:1-2255
- Intuitive installation thanks to plug and play: just plug in and go
- Compatible with ST600 series frequency inverters
- Sinusoidal encoder with/without C/D signals
- Voltage: 5VDC
- Easy installation thanks to plug and play
- Telefonische Beratung
- Auslegung und Inbetriebnahme
- Individuelle Parametrierung
- Programmbetrieb
- Parameterliste
- Compatible with ST600
- 4 digital inputs
- 1 digital output
- 1 analog input
- 1 analog output
- 1 relay with changeover contact
- 1 relay with one normally open
- Compatible with ST600 series of frequency converters
- High resolution graphical LCD control panel
- Connection via RJ45
- Compatible with ST600 frequency inverter series
- Recommended when using communication cards
- Enables communication with the inverter even when power supply is interrupted
- Compatible with ST600
- 4 digital inputs
- 1 digital output
- 2 relays with one normally open contact each.
- 1 connection for a PT100 temperature sensor
- 1 connection for a PT1000 temperature sensor
- Large shield mounting for motor cables
- Simple and efficient shielding connection
- Suitable for ST300 frequency inverters up to 4 kW
- Large shield mounting for motor cables
- Simple and efficient shielding connection
- Suitable for ST300 frequency inverters from 5.5 kW - 7.5 kW
