Certificeret i henhold til ISO 9001:2015
Certificeret kvalitetsstyringssystem
Certificeret kvalitetsstyringssystem
www.tuvsud.com/ms-zert
Signal Lamp Control WKST36
Produktnummer:
61140
EAN:
4260254478376
1.039,29 €*
Indgående varer
Detaljer
Specialistrådgivning på
+49 421 277 9999
+49 421 277 9999
Print
Information om produktet "Signal Lamp Control WKST36"
Highlights
- For connection of multiple signal lamps at nonstationary test equipment according to EN 50191 (e.g. in combination with Set of barriers). The network operation allows the specification of the risk level using signal lights regardless of the tester. When used in parallel with the test device: If it is a higher risk condition, the tester provides the dangerous state a higher value (different to manual adjustment). At the same or lower risk status applies the manual setting.
- Press the "Ready" -> green lamp lights up
- Press the "start" -> red lamp lights up
- Press the "Start" -> red lamp flashes
- In / Out:
- 2 outputs for 24 V DC, max. Output Current 4.2 A
- 2 inputs to the working conditions of the base unit
