Pressure transmitter for overpressure

Ordernr. 62069
EAN 4260409229884
€99.00
Excl. 16% VAT, excl. Shipping Cost
Goods expected soon
Details
Technical Service
+49 421 277 9999

The DT1 pressure transmitter comes with a ceramic measuring cell and is suitable for overpressure measurements (relative pressure). The DT1 is known for its high accuracy, high overpressure safety, great vibration resistance and low hysteresis. The pressure transmitters of this series are suitable for diverse measuring tasks in the fields of engineering, process- and environmental engineering.

Highlights

  • Pressure range: 0-40 bar
  • Output signal: 4-20mA / 0-10V
  • 2- / 3-wires
  • Pressure connection: 1/4" - 1/2"
  • Operating voltage: 12 - 30VDC

Technical details:

  • Pressure range: 0-40 bar
  • Output signal:
    • 4-20 mA, 2 wire
    • 0-10 V, 3 wire
  • Pressure connection:
    • connection thread G1 / 4 "in accordance with DIN EN 837
    • connection thread G1 / 2 "in accordance with DIN EN 837
  • Linearity: <1% of full scale of the measuring range
  • Hysteresis: <0.5% of full scale of the measuring range
  • Burst pressure: 2.5 x FS of the measurement range
  • Sensor: relative
  • Permitted ambient temperature: 0 ... + 85 ° C
  • Permitted media temperature: 0 ... + 85 ° C
  • Temperature offset error: 0.03% of full scale of the measuring range for each Kelvin
  • Temperature error range: 0.05% of full scale of the measuring range for each Kelvin
  • Electrical connection: valve connectors according to DIN EN 175301-803-A
  • Protection: IP65 according to EN 60529
  • Rated voltage: 24VDC
  • Permitted operating voltage: 12 - 30VDC
  • Housing material: chromium-nickel steel 1.4305
  • Material wetted parts: stainless steel 1.4305, seal Viton, sensor AI2O3

Whats in the box:

  • Pressure Transmitter
  • User manual