• Test frequency 20Hz - 5 MHz
• 320 x 240 dot matrix large-graphic LCD display
• Open/Short/Load correction
• 10 point list sweep function
• Test signal level monitor function

Specifications

• Measurement ranges:

  |Z|, R, X:	0.0001	Ω	-	99.999	MΩ
  DCR:	0.0001	Ω	-	99.999	MΩ
  |Y|, G, B:	0.0001	nS	-	99.999	S
  L:	0.0001	µH	-	9.9999	kH
  C:	0.0001	pF	-	9.9999	F
  Q:	0.0001		-	99999
  D:	0.0001		-	9.9999
  θ (DEG):	-179.999	°	-	179.999	°



• Test frequency: 20 Hz - 5 MHz (resolution: 10 mHz)
• Test parameter: |Z|, |Y|, C, L, X, B, R, G, D, Q, θ, DCR
  
• Basic accuracy: ± 0.1 %
• Test level range: f<1MHz 10mV - 5V, f>1MHz 10mV - 1V 
• Measuring time (≥1kHz.): up to 200 meas./sec.
• Equivalents circuit: series, parallel
• Ranging mode: auto and hold
• Trigger Mode: internal, manual, external and BUS
• Correction function: open, short, load
• Internal DC bias source: Voltage mode -5V to +5V (resolution 1mV), current mode -100mV to +100mV (resolution 20µA)
  
• Comparator-function: 10 bins and bin counters
• Memory: 20 groups of control settings can be saved
• Signal source output impedance: 10Ω, 30Ω, 50Ω, 100Ω
• Interfaces: RS232, Handler, LAN (LXI), USB, GPIB (option)

General Specifications

• Dimensions: 400 (Width) x 132 (Height) x 384 (Depth) mm
• Weight: 10 kg
• Power: 115 / 230 V ± 10 %, 50/60 Hz
• Temperature / humidity: 0°C - 40°C, ≤ 90% RH
• CE conformity, according EN 50 191

Standard accessories (inclusive)

• ST26011 Kelvin-Terminal-Test-Leads (click picture)
  
• ST26005-1  Component-Test-Fixture
• ST26004B Test-Leads
• Gilded shorting plate
• Power cord
• Operation manual
  
• Certificate of Calibration

Options

• ST26001A - 4-terminal-test-fixture
• SMD test fixtures
• Axial component test fixtures
  
• GPIB interface board and cable
• Gilded shorting plate