• User friendly interface
• Display: LCD display with 5 digits resolution and backlight
  

• Accurate load correction
• Built-in 5-bin comparator
• Hi/Go/Low comparison judgment and beeper alarm
• Memory for 10 sets of measurement settings

Specifications

• Measurement ranges:

  R:	0.0001	Ω	-	99.999	MΩ
  C:	0.001	pF	-	9999.9	µF
  L:	0.001	µH	-	99.999	kH
  Q:	0.0001		-	9999.9
  D:	0.0001		-	9.9999
  G,B:	0.00001	µs	-	999.999	s
  ∆%:	-99.999	%	-	999.999	%

• Test frequency: 10 points from 50Hz to 100kHz

• Basic accuracy: 0.1 %
• Test parameter: R,  X,  G,  B,  C,  L,  Q,  D, 

• Signal levels: 0.1Vrms, 0.3Vrms, 1Vrms
  
• Output impedance: 30Ω, 100Ω
  
• Measuring speed: up to 20meas./sec.
• Equivalents circuit: series, parallel
• Ranging mode: auto, hold, manual
  
• Trigger Mode: internal, manual, external and BUS
• Average time: 1 - 99
  
• Calibration: open, short, load correction
• Measurement terminals: 5 terminals
  
• Display mode: direct, ∆, ∆%
• Interfaces: RS232, Handler, GPIB (option)

General Specifications

• Dimensions: 275 (Width) x 120 (Height) x 425 (Depth) mm
• Weight: 3.8 kg
• Power: 115 / 230 V ± 10 %, 50/60 Hz
• Temperature / humidity: 0°C - 40°C, ≤ 90% RH
• CE conformity, according EN 50191

Including all accessories (double click picture)

• 4 terminal Kelvin test cable
• 4-terminal-test-fixture
• Gilded shorting plate
• Power cord
• Operation manual
• Certificate of Calibration

Options

• ST26047 4-terminal-test-fixture
• ST26008A SMD test fixture
  
• ST26006 axial component test fixtures
  
• 4-terminal Kelvin test cable special
  
• GPIB interface board

 download  user manual ST2817B