• Three version available with different frequency steps
• Large LCD (240×64 dot-matrix graphic) display

• User friendly interface
• Programmable test level from 10mVrms to 2.0Vrms
• Accurate load correction
• Built-in 10-bin comparator (ST2816), sorting and bin counter
• Hi/Go/Low comparison judgment and beeper alarm
• Key lock function
• Test signal level monitor function
• Memory for 12 sets of measurement settings

Specifications

• Measurement ranges:

  R:	0.00001	Ω	-	99.9999	MΩ
  G:	0.00001	µS	-	999.999	S
  C:	0.0001	pF	-	999.999	mF
  L:	0.00001	µH	-	9.99999	kH
  Q:	0.00001		-	99999.9
  D:	0.00001		-	9.99999
  ∆%:	-999.999	%	-	999.999	%

• Test frequency:

• Basic accuracy:

• Test parameter: Cp-D, Cp-Rp, Cs-D, Cs-Rs, Rp-Q, Rp-D, Rs-Q, Rs-D, Zs-Q, Zs-D

• Signal level: 10mV - 2.0V, with step of 10 mV
  
• Output impedance: 30Ω, 100 Ω
  
• Measuring speed: up to 30meas./sec.
• Equivalents circuit: series, parallel
• Ranging mode: auto, hold, manual
  
• Trigger Mode: internal, manual, external and BUS
• Average time: 1 - 255 (ST2816A, ST2817A)
  
• Calibration: open, short, load correction
• Mathematical functions: ∆ABS, ∆%
• Measurement terminals: 5 terminals
  
• Display mode: direct, ∆ABS, ∆%, V/I (V/I monitor), bin no., bin counter
• Display: 240 x 64 dot-matrix LCD display with 6 digits resolution

General Specifications

• Dimensions: 350 (Width) x 120 (Height) x 425 (Depth) mm
• Weight: 4.8 kg
• Power: 115 / 230 V ± 10 %, 50/60 Hz
• Temperature / humidity: 0°C - 40°C, ≤ 90% RH
• CE conformity, according EN 50191

Including all accessories (double click picture)

• 4 terminal Kelvin test cable
• 4-terminal-test-fixture
• Gilded shorting plate
• Power cord
• Operation manual
• Certificate of Calibration

Options

• ST26047 4-terminal-test-fixture
• ST26008A SMD test fixture
  
• ST26006 axial component test fixtures
  
• 4-terminal Kelvin test cable special
  
• GPIB interface board

  Download LCR Meter Users Manual ST2816B (PDF 1.430 kB)