• Ultrahigh measurement speed: 9ms/meas.
• Test-Frequencies: 100Hz, 20Hz, 1kHz, 10 kHz
  
• Programmable test level from 10mVrms to 1.0Vrms
• Large LCD (240×64 dot-matrix graphic) display
• Humanization operation board
• Large-amount ceramic capacitor constant-level measurement
• Accurate load correction
• 5 selectable source impedance modes
• Built-in 10-bin comparator, sorting and bin counter
• Hi/Go/Low comparison judgment and beeper alarm
• Key lock function
• Test signal level monitor function
• 12 sets of measurement settings saved
• Measurement parameter saved automatically loaded

Specifications

• Measurement ranges:

  R:	0.0001	Ω	-	99.999	MΩ
  DCR:	1	mΩ	-	99.9999	Ω
  G:	0.0001	µS	-	999.99	S
  C:	0.001	pF	-	1.9999	F
  Q:	0.0001		-	99999
  D:	0.0001		-	9.9999
  ∆%:	-99.999	%	-	999.999	%

• Test frequency: 100 Hz, 120 Hz, 1 kHz, 10 kHz
  
• Test parameter: Cp-D, Cp-Rp, Cs-D, Cs-Rs, Rp-Q, Rp-D, Rs-Q, Rs-D, Zs-Q, Zs-D
• Basic accuracy: ± 0.1 %
• Signal level: 10mV - 1.0V, with step of 1 mV
  <200mV step 1mV ; ≥200mV with step of 10 mV
  
• Output impedance: 25 Ω, 100 Ω, 25Ω/100Ω, C.V.
  
• Measuring speed: 9ms/meas.
• Equivalents circuit: series, parallel
• Ranging mode: auto, hold, manual
  
• Trigger Mode: internal, manual, external and BUS
• Average time: 1 - 255
• Calibration: open, short, load correction
• Mathematical functions: ∆ABS, ∆%
• Measurement terminals: 5 terminals
  
• Display mode: direct, ∆ABS, ∆%, V/I (V/I monitor), bin no., bin counter
• Display: 240 x 64 dot-matrix LCD display with 5 digits resolution

General Specifications

• Dimensions: 350 (Width) x 120 (Height) x 425 (Depth) mm
• Weight: 4.8 kg
• Power: 115 / 230 V ± 10 %, 50/60 Hz
• Temperature / humidity: 0°C - 40°C, ≤ 90% RH
• CE conformity, according EN 50191

Including all accessories capacitance meter (double click picture)

• 4 terminal Kelvin test cable
• 4-terminal-test-fixture
• Gilded shorting plate
• Power cord
• Operation manual capacitance meter
• Certificate of Calibration

Options

• ST26047 4-terminal-test-fixture
• ST26008A SMD test fixture
  
• ST26006 axial component test fixtures
  
• 4-terminal Kelvin test cable special
  
• GPIB interface board