|
The S3301 Electrical Safety Tester is a combination - compacttester with PE + Iso + HV + Function. S 3301 is an extremely compact testing device for testing the electrical safety and function of electronic products according to a great variety of national and international norms. It is ideally suited for routine tests in series production. Fast and reliable testing in accordance with ISO9001 with or without result documentation is essential.
Test Steps
- Continuity test (option RA33-b)
- 24 VDC / 0,5 A
- thresholds up to 0,5 A
- Earth bond test
- test current from 10 AAC up to 30 AAC
- fully electronic AC current source
- no-load voltage 6 V or 12 V
- 4-wire-technique
- resistance measurement according EN 60335-1
- till 20 AAC, max. 500 mOhm
- at 25 AAC, max. 400 mOhm
- at 30 AAC, max. 300 mOhm
- voltage drop up to 4 VAC (EN 60204-1)
- thresholds programmable
- Insulation measurement
- test voltage via earth bond test probe
- safety current limited, potential free
- electronically stabilized fixed voltage 500 VDC
- measuring range 5 MOhm and 50 MOhm
- thresholds programmable
- High voltage test DC
- safety current limited, potential free
- electronically stabilized fixed voltage 1500 VDC
- threshold 0,1 up to 3,9 mA
- High voltage test AC
- safety current limited, potential free
- electronically stabilized fixed voltage 5000 VDC
- threshold 1 up to 100 mA
General
- Menu-driven programming interface
- Programming software for PC
- Operating modes: manual, automatic
- Optical and acoustic error message
- Memory management for 50 programms.
- Autostart Function
- LC-Display
- Internal clock / calendar
- Timer 0.1 ... 99.9 sec
- Interfaces:
- RS 232, printer connection and remote control
- I/O - handler 24 VDC (start, stop, go, no-go)
- Integration of IN / OUTPUTS into the test sequence, to integrate
mechanical fixtures or to switch relay matrixes
- Terminals: sockets or test probe
- Discharge of the device under test
- LabVIEW Drivers and DLL’s available
- Efficient Remote Control Software DAT3800
- XML, SQL, Barcode, network compatible, screen view and Steps
- Device: 19" / 5 HU w/o housing
- Supply 230 V/50 Hz
- Weight abt. 32 kg
- IP 21
|
Calibration:
|
|
|
without
|
|
|
|
|
MP 01 calibration protocol according ISO 9001
|
|
+ 69,00 EUR |
| |
|
Control Software:
|
|
|
without
|
|
|
|
|
DAT 3800 Full-automatically control, barcode, XML, SQL, Net, sta
|
|
+Price on request |
| |
|
DLL:
|
|
|
without
|
|
|
|
|
DLL 38 for remote control via RS 232, USB or Ethernet
|
|
+Price on request |
| |
|
HV Probes:
|
|
|
without
|
|
|
|
|
Set: 2 hvprobes SP02 with 2 m HV-cable
|
|
+ 142,00 EUR |
|
|
Set: 2 hvprobes SP02 with 5 m HV-cable
|
|
+ 210,00 EUR |
|
|
Set: 2 hvprobes SP02 and SP03 with start key 2 m cable
|
|
+ 257,00 EUR |
| |
|
Mains supply Tester:
|
|
|
without
|
|
|
|
|
PW 15 mains supply 115 V (1-phase)
|
|
+ 147,00 EUR |
| |
|
PE Test Probe:
|
|
|
PE 39i Handheld PE test probe
|
|
+ 206,00 EUR |
|
|
without
|
|
|
| |
|
Rack mounting HV tester:
|
|
|
without
|
|
|
|
|
EH 1905y Solide Rackmount Housing 19"
|
|
+ 306,00 EUR |
| |
|
Test Dummy:
|
|
|
without
|
|
|
|
|
D 2000 Test Dummy for HV test
|
|
+ 296,00 EUR |
| |
|
Test Leads:
|
|
|
without
|
|
|
|
|
KL 05 Extension for PE-39i 5 Meters
|
|
+ 35,00 EUR |
| |
|
